Home > Sintered Metal Fiber >

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance

Product Categories

Hunan Huitong Advanced Materials Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance

Name: Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance
Brand: huitong
Price: 1 USD

Brand Name : huitong

Model Number : 30um

Certification : SGS

Place of Origin : Yiyang,China

MOQ : 10kg

Price : Negotiable

Payment Terms : L/C, T/T

Supply Ability : 10tons per months

Delivery Time : depends on quantity

Packaging Details : paper carton

MOQ : 10kg

temperature : 1000centi degree

Material : Fecral

Diameter : 30um

product name : sintered metal fiber

certification : SGS

Contact Now

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance

Iron-chromium-aluminum (FeCrAl) alloys have long been used as high-temperature heating elements. Currently, wrought FeCrAl alloys are under development as one of the promisingcandidates for accident-tolerant fuel (ATF) cladding materials in light-water reactors (LWRs).These alloys have shown excellent corrosion and oxidation resistance in a high-temperature steam environment, compared with current commercial zirconium alloys [6-8]. Their low radiation-induced-swelling and tolerance of off-normal conditions are also worth noting.Under development efforts for ATF FeCrAl alloys, 10–13 wt.% Cr and 5–6 wt.% Al have been employed for improved surface protection effects at both the service temperature and elevated temperatures in accident-case scenarios. Small amount of alloying elements, such as molybdenum (Mo) and/or niobium (Nb), have also been added to improve the strength and control microstructures of FeCrAl alloys.

【Description】

The Fecral fiber is made of iron-chromium-aluminum alloy wire by a bundle drawing process and has a diameter of from 8 μm to 40 μm. Fecral alloy is a new type of electrothermal alloy with high electrical resistance, low temperature coefficient, long service life, high surface load and good oxidation resistance. It can be used in higher temperature environment than stainless steel fibers.

【Application】

It mainly used as raw materials for the manufacture of automobile exhaust gas purifiers(GPF), high temperature filter felts, burners, etc.

【Parameters】

Main technical specification:

Diameter(μm)	Strength level	Filament (F)	Strength(cn)	Elongation Rate%	Weight/meter(g/m)
8	HS	1700	≥4.5	≥0.95	0.55~0.65
8	MS	1700	≥3.0	≥0.75	0.50~0.70
12	HS	1700	≥12.0	≥1.0	1.3~1.5
12	MS	1700	≥9.0	≥0.8	1.2~1.6
22	HS	1700	≥50.0	≥1.20	4.4~5.0
22	MS	1700	≥30.0	≥1.00	4.2~5.2
12	HS	100×2	≥19.0	≥1.1	0.14~0.18

Product Tags:

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hunan Huitong Advanced Materials Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance

Conductive Sintered Metal Fiber

Sintered Metal Fiber High Electrical Resistance

SGS Sintered Metal Fiber

Conductive Sintered Metal Fiber Fecral Fiber With High Electrical Resistance Images